How to do D-Link Router Configuration in 2023? | How to do configuration of D-Link wireless N150 ADSL2 router? | How to do D-Link Router configuration with BSNL

D-Link wireless N150 ADSL2 Router overview

This Router comes up with the maximum speed of 150 Mbps. And it is one of the best router under 1500 RS. Before going for D-Link wireless N150 ADSL2 router configuration with BSNL lets see the details of router.
Type: Wireless router with modem
Interface: Four 10/100 LAN, one 10/100 WAN
Security: NAT, SPI Firewall and 64/128 bit WEP encryption

 

How to do D-Link wireless N150 ADSL2 router configuration / How to do D-Link Router configuration with BSNL

Things you need to know before starting configuration.

• You must have active/approved wired connection.
• Username and password for your connection that you got from ISP

Connect to the Router

• You connect your device to router. If it's a laptop or computer then connect by Cable.
• If it's a mobile phone or tablet then connect to the wifi network D-Link (Default Name)

Login to the address 192.168.1.1

• Now open any browser and enter the above address and login to that.
• Default Username and Password will be admin-admin.
• Click and setup and then on setup wizard.

Change Device Login Password

• After successfully logged in you need to change the login credentials.
• It's not compulsory you can skip as well.
• After that click on next

Set Time and Date

• Select the time zone according to your area.
• You can select the time and date manually also.
• Remember you need to select exact time and date
• Then click on next

Setup Internet Connection

• The next step is to Setup the internet Connection.
• Select your protocol as PPPoE
• Then left all other things as default.
• Enter the username and password that you got from your ISP.
• Click on next.

Configure Wireless Network

• Enable the wireless Network.
• Select/Enter the Name for your wifi network.
• Select the security level or encryption to WPA2 Mixed.
• Enter the password according to you.
• Then click on next

Completed and Apply

• Now the setup is completed just check all the information and click on apply
• Your connection will live within minutes.

Conclusion

So here we have given you the full guide about how to configure your wireless D-Link N150 ADSL2 Router. If you still have any doubts then let me know in comments.
Here is small video from techwire connect about configuration